TU8002-L
Embedded RS232 DB9 Serial to Ethernet Device Server Module
-
Specification & Feature
Feature - 10/100M adaptive Ethernet interface
- support AUTO MDI / MDIX, Use crossover cable or parallel cable connection
- 115.2kbps and more baud rate can be selected in manual or automatic settings ;
- Working method: TCP Sever, TCP Client, UDP mode
- supports virtual serial port
- working port , destination IP address and port number are our management software can easily set up
- configuration module parameters through the serial port by AT commands
- disconnected from the network can be automatically disconnected , ensure that the entire network and reliable TCP connection ;
- The flexible serial data sub-frame is set to meet user demand for subcontracting ;
- Provide supporting TCPIP dimensional machine programming information ;
- UDP packet radio mode banned , anti-interference ability than similar products ;
- In the case of high-speed data transceiver , heat is still relatively low.
- support the DNS dynamic domain remote connections.
Specification - UART1 Baud Rate : 300bps ~ 1.8432Mbps
- Parity: None , Odd , even parity
- data bits : 7,8 bit
- Stop bit : 1,2 bit
- Flow control: no flow control , RTS / CTS
- Baud rate : 1.2kbps ~ 4.8kbps
- Parity: No parity
- data bits : 8 bit
- Stop bit : 1,2 bit
- Flow control: no flow control
- working environment : -45 ~ 85 ℃, 5 ~ 95%
- humidity Storage environment : -55 ~ 125 ℃,, 5 ~ 95% humidity
- Interface features: network interface complies with TCP / IP standard protocol , in line RS232/485/422 serial protocol
- Electrical Interface : Network interface bit RJ45 socket , serial interface bit 4 Terminal Block Interface
- Transmission medium : UTP shielded twisted pair cable
- working method: TCP Server mode , TCP Client mode , UDP mode , virtual serial port mode
- Transmission distance : RS485/422 interfaces 1200m; RS232 interfaces 15m
- Power Supply: 12V / 1A